| Specification | Unit | CP6266L |
| Swing over bed | mm | 660 |
| Swing over cross slide | mm | 430 |
| Distance between centers | mm | 1000,1500,2000,3000 |
| Swing in gap | mm | 870 |
| Width of gap | mm | 240 |
| Width of bed | mm | 390 |
| Spindle nose | D8 | |
| Spindle bore diameter | mm | 105 |
| Morse taper of spindle center | 1:20 | |
| Spindle speed | rpm | 6-1120 (24 steps) |
| Max output torque of spindle | N.m | 1500 |
| Range of longitudinal feed | mm/rev | 0.063-6.43 (0.0025-0.25in/rev) |
| Range of cross feed | mm/rev | 0.027-2.73 (0.00106-0.107in/rev) |
| Lead screw pitch | 12mm(metric system)/2 t.p.i(inch system) | |
| Metric threads | mm | |
| Inch system threads | t.p.i | |
| Module threads | 0.5-112mm (42 kinds) | |
| Diameter pitch threads | 56-1/4DP (45 kinds) | |
| Cross slide travel | mm | 360 |
| Top slide travel | mm | 200 |
| Section specification of tool post | mm | 25×25 |
| Longitudinal rapid traveling speed | m/min | 4.5 (50Hz) / 5.4 (60Hz) |
| Transversal rapid traveling speed | m/min | 1.9 (50Hz) / 2.3 (60Hz) |
| Morse taper of tailstock center | M5 | |
| Max travel of tailstock quill | mm | 150 |
| Tailstock quill diameter | mm | 75 |
| Main motor | kw | 11 |
| Rapid travel motor | 250W/1360rpm | |
| Coolant pump motor | 90W/25L/min | |
| Hercules Machinery Equipment Ltd. | ||
Standard accessories:
1.Ø325mm 3-jaw chuck
2.Thread chasing dial
3. Chip guard for L≤2m lathe; Follow Chipe guard for L≥3m lathe
4.Footbrake
5.Oil gun
6.Live center 5#
7.Center 5#
8.Center sleeve
Optional accessories:
1.Ø630mm Face plate for 50 series; Ø800mm Face plate for 66,76 series
2.Ø400mm 4-jaw chuck
3.Ø20-140mm Small steady rest
4.Ø130-260mm Large steady rest
5.Ø20-80mm Follow rest
6.Ø250mm Drive plate
7.4-position stop for saddle
8.4-position stop for cross slide
9.Micro stop for saddle
10.Quick change tool post
11. Damping washer
12.Taper turning attachment(TTA)
13.Halogen work lamp
14.Digital readout(DRO)
15.CE standard compliance
16.Chuck cover